Double Glazing Repair in Kirkby, Including uPVC Doors

Kirkby’s homes and their windows

Kirkby grew quickly as a post-war town, with a large amount of social and owner-occupied housing built in a relatively short period. Over the following decades most of those homes had uPVC double glazing and doors installed, often in waves. The result is that many properties have windows and doors of a similar age, and similar faults appear on street after street: units that have lost their seal, doors that have dropped on their hinges and locks that have worn.

Doors are often the first thing to go

Front and back doors open and close far more often than any window, so they tend to show wear first. Here is what we typically find on Kirkby doors:

• Dropped door. The door sags on its hinges, the hooks stop lining up with the keeps and the handle becomes hard to lift. Adjusting or replacing hinges usually cures it.
• Worn gearbox. If the lock still struggles once the door is aligned, the gearbox may be failing. Our page on fixing uPVC door locks explains how we match the replacement.
• Tired panel. Faded, cracked or damaged infill panels can be swapped on many uPVC doors – see uPVC door panel replacement.
• Draughty or broken letterbox. Flaps that stick open or let cold air through can be replaced, and we also fit cat flaps into suitable panels and glass. More on our letterbox and cat flap page.

And the windows?

The glass units in older Kirkby windows are often the original ones, and the edge seal is the part most likely to have failed. Moisture creeps past the spacer bar, the desiccant inside fills up, and the glass clouds over between the panes. We replace the unit, made to size, in the same frame. Hinges and espagnolette locks wear too, especially on windows opened every day for ventilation, and they are usually straightforward to renew once we have identified the type.

Where a pane is low down or in a door, the replacement has to be toughened or laminated safety glass. We check the location when we measure and specify the right glass.

How we handle a Kirkby repair

Call or send the form, and we will ring back to ask what is wrong, which door or window it is, the frame material and roughly how old it is. If you can, take a photo of the lock edge or the spacer bar, as stamped details help us find parts. We then visit, look, measure and quote in writing. Smaller hardware jobs can often be finished on the first visit if the part is in the van; glass units are made to measure and fitted on a return trip. Before we go, we test the door or window opens, closes and locks properly.

Areas around Kirkby

We also cover Huyton to the south, Maghull to the west in Sefton, and Prescot. To see every service we offer, head to our homepage for double glazing repairs across Merseyside, including replacement units and door lock repairs in Liverpool.